Thermal Imaging Survey in Leixlip
Infrared surveys that show where your home loses heat, where insulation is missing, and where damp is likely. Covering Salmon Leap, Confey, Leixlip Castle and the surrounding area.
Thermal Imaging Surveys for Leixlip homes
In Leixlip, a thermal survey separates the 1970s and 1980s estate homes with unfilled cavities from newer homes that perform well, and shows where attic insulation needs topping up. Village homes near the river show solid-wall heat loss and potential damp areas. The survey gives each house a clear starting point.
How homes in Leixlip lose heat
The 1970s and 1980s estates usually have cavities that were built empty or partly filled and original attic insulation, rating D. Newer homes rate B to C and mostly need airtightness work. Village homes near the river have solid walls and can be prone to damp.
Typical housing: Older village homes around the Salmon Leap and Confey, 1970s and 1980s estates through the centre, and 1990s to 2010s estate growth on the outskirts.
How thermal imaging survey works
A thermal imaging camera reads the surface temperature of walls, ceilings, floors and windows. When there is a good temperature difference between inside and outside, heat escaping through a weak spot shows up clearly: a gap in attic insulation, an uninsulated lintel, a cold corner where condensation and mould tend to start, or a draught path around a window frame.
Thermal Imaging Survey in Leixlip: questions
Do you carry out thermal imaging survey in Leixlip?
Yes. We cover Leixlip and the surrounding Co. Kildare area, including Salmon Leap, Confey, Leixlip Castle. Older village homes around the Salmon Leap and Confey, 1970s and 1980s estates through the centre, and 1990s to 2010s estate growth on the outskirts.
Is there a grant for thermal imaging survey in Leixlip?
There is no standalone SEAI grant for a thermal imaging survey. It is often the cheapest way to make sure grant-funded insulation goes where it does the most good. Grant amounts are set nationally by SEAI and change from time to time, so check seai.ie before applying. We confirm what your home is likely to qualify for during the survey.
When is the best time for a thermal imaging survey?
Thermal imaging needs a clear temperature difference between inside and outside, so the heating season from October to April gives the clearest results. Early morning or evening surveys avoid sunshine warming the walls.
Can a thermal camera see damp?
Damp areas often show as cooler patches because evaporation cools the surface, and cold surfaces are where condensation forms. The camera points to likely problem areas, which we then check with a moisture meter where needed.
Will it show whether my cavity wall insulation is complete?
Yes, gaps or settled areas in cavity fill usually show as warmer patches on the outside of the wall in winter, because more heat escapes through them. It is a quick way to check older fills.
Book a free survey in Leixlip.
We cover Leixlip and the surrounding area. Tell us about your home and we will arrange a visit, usually within a week.