Thermal Imaging Survey in Dublin 6
Infrared surveys that show where your home loses heat, where insulation is missing, and where damp is likely. Covering Rathmines, Rathgar, Terenure and the surrounding area.
Thermal Imaging Surveys for Dublin 6 homes
Thermal imaging of Rathmines, Rathgar and Terenure red-bricks typically shows solid brick walls losing heat across their full surface, cold floors, draughty sashes and chimney breasts, and particularly cold basements and garden-level rooms. The survey shows which rooms and walls deserve internal insulation first, which matters because dry-lining a period house is done room by room.
How homes in Dublin 6 lose heat
Solid brick walls, suspended timber floors, open fireplaces and single-glazed sashes typically put these homes at E to G. Basements and garden levels in the larger Rathgar houses add damp and cold-floor problems. Draughts are often the single biggest and cheapest loss to fix.
Typical housing: Victorian and Edwardian red-brick terraces and semis in Rathmines, Rathgar and Terenure, with classic three-window frontages and long rear gardens.
How thermal imaging survey works
A thermal imaging camera reads the surface temperature of walls, ceilings, floors and windows. When there is a good temperature difference between inside and outside, heat escaping through a weak spot shows up clearly: a gap in attic insulation, an uninsulated lintel, a cold corner where condensation and mould tend to start, or a draught path around a window frame.
Thermal Imaging Survey in Dublin 6: questions
Do you carry out thermal imaging survey in Dublin 6?
Yes. We cover Dublin 6 and the surrounding Dublin area, including Rathmines, Rathgar, Terenure. Victorian and Edwardian red-brick terraces and semis in Rathmines, Rathgar and Terenure, with classic three-window frontages and long rear gardens.
Is there a grant for thermal imaging survey in Dublin 6?
There is no standalone SEAI grant for a thermal imaging survey. It is often the cheapest way to make sure grant-funded insulation goes where it does the most good. Grant amounts are set nationally by SEAI and change from time to time, so check seai.ie before applying. We confirm what your home is likely to qualify for during the survey.
When is the best time for a thermal imaging survey?
Thermal imaging needs a clear temperature difference between inside and outside, so the heating season from October to April gives the clearest results. Early morning or evening surveys avoid sunshine warming the walls.
Can a thermal camera see damp?
Damp areas often show as cooler patches because evaporation cools the surface, and cold surfaces are where condensation forms. The camera points to likely problem areas, which we then check with a moisture meter where needed.
Will it show whether my cavity wall insulation is complete?
Yes, gaps or settled areas in cavity fill usually show as warmer patches on the outside of the wall in winter, because more heat escapes through them. It is a quick way to check older fills.
Book a free survey in Dublin 6.
We cover Dublin 6 and the surrounding area. Tell us about your home and we will arrange a visit, usually within a week.