Thermal Imaging Survey in Maynooth
Infrared surveys that show where your home loses heat, where insulation is missing, and where damp is likely. Covering Maynooth village, Maynooth University, Carton and the surrounding area.
Thermal Imaging Surveys for Maynooth homes
On a frosty Maynooth morning a thermal survey shows clear differences between estate homes with filled and unfilled cavities, and highlights attic insulation that has never been topped up. Village homes show solid-wall heat loss. Inland Kildare's colder nights give strong thermal contrast, which makes surveys here especially clear.
How homes in Maynooth lose heat
The 1980s and 1990s estates usually have partial-fill cavities and attic insulation that has never been topped up, rating around C3 to D1. Village terraces have solid walls and suspended floors. Inland Kildare is colder in winter than coastal Dublin, so the payback on insulation is a little better here.
Typical housing: Older village terraces and pre-war semis near the centre, 1980s and 1990s estates through the middle of the town, and newer Carton, Moyglare and university-edge developments.
How thermal imaging survey works
A thermal imaging camera reads the surface temperature of walls, ceilings, floors and windows. When there is a good temperature difference between inside and outside, heat escaping through a weak spot shows up clearly: a gap in attic insulation, an uninsulated lintel, a cold corner where condensation and mould tend to start, or a draught path around a window frame.
Thermal Imaging Survey in Maynooth: questions
Do you carry out thermal imaging survey in Maynooth?
Yes. We cover Maynooth and the surrounding Co. Kildare area, including Maynooth village, Maynooth University, Carton. Older village terraces and pre-war semis near the centre, 1980s and 1990s estates through the middle of the town, and newer Carton, Moyglare and university-edge developments.
Is there a grant for thermal imaging survey in Maynooth?
There is no standalone SEAI grant for a thermal imaging survey. It is often the cheapest way to make sure grant-funded insulation goes where it does the most good. Grant amounts are set nationally by SEAI and change from time to time, so check seai.ie before applying. We confirm what your home is likely to qualify for during the survey.
When is the best time for a thermal imaging survey?
Thermal imaging needs a clear temperature difference between inside and outside, so the heating season from October to April gives the clearest results. Early morning or evening surveys avoid sunshine warming the walls.
Can a thermal camera see damp?
Damp areas often show as cooler patches because evaporation cools the surface, and cold surfaces are where condensation forms. The camera points to likely problem areas, which we then check with a moisture meter where needed.
Will it show whether my cavity wall insulation is complete?
Yes, gaps or settled areas in cavity fill usually show as warmer patches on the outside of the wall in winter, because more heat escapes through them. It is a quick way to check older fills.
Book a free survey in Maynooth.
We cover Maynooth and the surrounding area. Tell us about your home and we will arrange a visit, usually within a week.