Thermal Imaging Survey in Sandyford
Infrared surveys that show where your home loses heat, where insulation is missing, and where damp is likely. Covering Sandyford Hall, Stepaside, Carrickmines and the surrounding area.
Thermal Imaging Surveys for Sandyford homes
On a cold morning in Sandyford, a thermal survey of a 1970s or 1980s semi usually shows the same story: the cavity walls glow where the cavity is empty or the fill has gaps, the attic shows bright patches where insulation has been pushed aside around the hatch and water tank, and window lintels show as warm bands of escaping heat. Newer Stepaside and Carrickmines homes look better overall but often show cold spots around downlights and at the junction of ceilings and external walls. The images make it clear what to tackle first.
How homes in Sandyford lose heat
The older estates were built with cavity walls that were often left empty or partly filled, thin attic insulation and early double glazing, which typically leaves them in the C to D BER range. The newer Stepaside and Carrickmines homes perform better but often have airtightness gaps around downlights and attic hatches. Being on the foothills of the Dublin Mountains, homes here also sit in a slightly colder, windier spot than the city.
Typical housing: 1970s and 1980s detached and semi-detached homes around Blackthorn and Sandyford Hall, with newer estates running up into Stepaside and Carrickmines.
How thermal imaging survey works
A thermal imaging camera reads the surface temperature of walls, ceilings, floors and windows. When there is a good temperature difference between inside and outside, heat escaping through a weak spot shows up clearly: a gap in attic insulation, an uninsulated lintel, a cold corner where condensation and mould tend to start, or a draught path around a window frame.
Thermal Imaging Survey in Sandyford: questions
Do you carry out thermal imaging survey in Sandyford?
Yes. We cover Sandyford and the surrounding Dublin area, including Sandyford Hall, Stepaside, Carrickmines. 1970s and 1980s detached and semi-detached homes around Blackthorn and Sandyford Hall, with newer estates running up into Stepaside and Carrickmines.
Is there a grant for thermal imaging survey in Sandyford?
There is no standalone SEAI grant for a thermal imaging survey. It is often the cheapest way to make sure grant-funded insulation goes where it does the most good. Grant amounts are set nationally by SEAI and change from time to time, so check seai.ie before applying. We confirm what your home is likely to qualify for during the survey.
When is the best time for a thermal imaging survey?
Thermal imaging needs a clear temperature difference between inside and outside, so the heating season from October to April gives the clearest results. Early morning or evening surveys avoid sunshine warming the walls.
Can a thermal camera see damp?
Damp areas often show as cooler patches because evaporation cools the surface, and cold surfaces are where condensation forms. The camera points to likely problem areas, which we then check with a moisture meter where needed.
Will it show whether my cavity wall insulation is complete?
Yes, gaps or settled areas in cavity fill usually show as warmer patches on the outside of the wall in winter, because more heat escapes through them. It is a quick way to check older fills.
Book a free survey in Sandyford.
We cover Sandyford and the surrounding area. Tell us about your home and we will arrange a visit, usually within a week.